ZEEPIN C220 Car TPMS Voice Broadcast 4 External Sensors - Black - 3E54238912

Why You Need TPMS
Tire Pressure Monitoring System, also called TPMS, uses pressure monitoring sensors within each tire to monitor specific pressure levels. Combined with the solar energy display, it lets driver get the real-time tire pressure data, temperature data and status, warning messages at once. Solar power display features the green, low carbon and renewable advantages, enabling you to charge the device faster and greener.

What You Will Get
- High-definition TFT color screen display
- Supports voice broadcast
- Supports solar energy/USB charging
- Shows four wheels' tire pressure and temperature simultaneously
- High and low tire pressure alarm
- High temperature alarm
- Air leakage condition alarm
- Multiple information: sensor/display's battery capacity display, solar energy charging display, spare tire display
- Non-stop monitor always keeps an eye on your car's performance
- Reliable alarm system delivers audio alerts whenever an unusual situation occurs
- Low power alarm

Intelligent Alarm
1. Leakage Alert 
When the tire leaks continuously, the display will show the declining pressure data and fault icon, as well as send an alert

2. High Temperature Alert
When the tire temperature is higher than the setpoint (default 70 Deg.C), the pressure and fault icon on the display will flicker with buzzer warning (temperature setting range: 60 - 90 Deg.C)

3. High Pressure Alert
When the tire temperature reaches to the upper limit value (default 3.0 Bar), the pressure and fault icon on the display will flicker with buzzer warning (upper limit value setting range: 1.1 - 5.0 Bar)

4. Low Pressure Alert
When the tire temperature reaches to the lower limit value (default 2.0 Bar), the pressure and fault icon on the display will flicker with buzzer warning (upper limit value setting range: 1.1 - 4.9 Bar)

Specification
Brand: ZEEPIN
Model: C220
Category: TPMS
Install way: external
Display way: screen
Sensor working voltage: 2 - 3.6V 
Display working voltage: 3.5 - 4.2V 
Optional pressure units: Psi/Bar 
Optional temperature units: Deg.C, Deg.F
Operating frequency: 433.92MHz +/- 20KHz
Sensor working temperature: -40 Deg.C - 80 Deg.C
Display working temperature: -40 Deg.C - 85 Deg.C
Monitoring temperature scope: -40 Deg.C - 85 Deg.C
Monitoring pressure scope: 0 - 5 Bar
Display battery capacity: 500mAh
Sensor battery supply: CR1632 battery
Sensor battery capacity: 120mAh