P10 Car OBD Smart Digital Meter HUD Head Up Display - Black - 3G78942212
$29.23Save 69%
$94.30
Offer ends in:
Tax excluded
Color:
Black
SKU:
3G78942212
Gift-wrap:
Available
- Payment security - Secure Transactions Using Paypal
- Quick Ship - Leaves Warehouse in 1-2 Business Days
- Return policy - 30 Days Free Exchange & Return Policy
Description:
P10 HUD is specially designed to avoid the danger of lowering down head to read information, which can display the driving data such as vehicle speed, engine RPM, fuel consumption, water temperature, voltage and so on. This item enables the driver to get the information directly and instantly without shifting horizon, which is of vital value in reducing traffic accidents caused by absent-mind due to looking down.
Main Features:
- Plug and play: automatically adapt to the vehicle type which is in line with OBD II or EUOBD port
- TFT digital display: with multi-color design, makes the screen more abundant and easier to operate and read
- Upgraded functions: upgraded with new functions like accelerating competitive mode, brake performance test and entire car data stream information reading
- Rich contents: vehicle speed, engine RPM, water temperature, instantaneous/average fuel consumption, driving distance measurement, driving time, low voltage alarm, high water temperature alarm, over speed alarm, engine fault code alarm, eliminate the fault code, freely switch between kilometer and mile
- Smart design: auto power on/off function, the HUD will start or turn off automatically with vehicle status, can effectively protect your vehicle's battery, also retain the manual switch mode, easier to control
Technical Parameters:
- Environment temperature: -40 - 80 Deg.C
- Atmospheric pressure: 86 - 106 kPa
- Relative humidity: 10 - 95pct
- Environmental noise: 60dB (A) and less
- Alarm sound level: 30dB (A) and more
- Working voltage: DC 9 - 16V (DC 12V/400mA)
Installation Method:
- Know your vehicle brand. This product works for cars with OBD II agreement or EUOBD agreement. Open the engine hood and find the sticker below it. If it has the words like OBD II CERTIFIED, then it can be installed
- Find out the 16-pin diagnostic link of the vehicle and connect it well with OBD II line
- First time to use: start the engine, the HUD will show the voltage and scan the OBD II program; if it displays the fuel consumption, speed, RPM, it means successful installation; if after a few minutes, it shows the voltage only, please check the device, OBD cable and interface, then turn on again
P10 HUD is specially designed to avoid the danger of lowering down head to read information, which can display the driving data such as vehicle speed, engine RPM, fuel consumption, water temperature, voltage and so on. This item enables the driver to get the information directly and instantly without shifting horizon, which is of vital value in reducing traffic accidents caused by absent-mind due to looking down.
Main Features:
- Plug and play: automatically adapt to the vehicle type which is in line with OBD II or EUOBD port
- TFT digital display: with multi-color design, makes the screen more abundant and easier to operate and read
- Upgraded functions: upgraded with new functions like accelerating competitive mode, brake performance test and entire car data stream information reading
- Rich contents: vehicle speed, engine RPM, water temperature, instantaneous/average fuel consumption, driving distance measurement, driving time, low voltage alarm, high water temperature alarm, over speed alarm, engine fault code alarm, eliminate the fault code, freely switch between kilometer and mile
- Smart design: auto power on/off function, the HUD will start or turn off automatically with vehicle status, can effectively protect your vehicle's battery, also retain the manual switch mode, easier to control
Technical Parameters:
- Environment temperature: -40 - 80 Deg.C
- Atmospheric pressure: 86 - 106 kPa
- Relative humidity: 10 - 95pct
- Environmental noise: 60dB (A) and less
- Alarm sound level: 30dB (A) and more
- Working voltage: DC 9 - 16V (DC 12V/400mA)
Installation Method:
- Know your vehicle brand. This product works for cars with OBD II agreement or EUOBD agreement. Open the engine hood and find the sticker below it. If it has the words like OBD II CERTIFIED, then it can be installed
- Find out the 16-pin diagnostic link of the vehicle and connect it well with OBD II line
- First time to use: start the engine, the HUD will show the voltage and scan the OBD II program; if it displays the fuel consumption, speed, RPM, it means successful installation; if after a few minutes, it shows the voltage only, please check the device, OBD cable and interface, then turn on again
Type: Portable
0.176
Package weight: 0.209 kg Product Size(L x W x H): 6.80 x 6.00 x 4.40 cm / 2.68 x 2.36 x 1.73 inches
Package Size(L x W x H): 14.60 x 8.80 x 4.80 cm / 5.75 x 3.46 x 1.89 inches
Package Contents: 1 x HUD, 1 x OBD Cable, 1 x Non-slip Mat, 1 x English Instruction
999 Items